Abundant Active Sites Research Articles

Electropolymerization of a Carbonyl-Modified Dihydropyrazine Derivative for Aqueous Zinc Batteries with Ultrahigh Cycling Stability.

The design of aqueous zinc-ion batteries (ZIBs) that have high specific capacity and long-term stability is essential for future large-scale energy storage systems. Cathode materials with extended π-conjugation and abundant active sites are desirable to enhance the charge storage performance and the cycling stability of the aqueous ZIB. Based on this concept, 6,9-dihydropyrazino[2,3-g]quinoxaline-2,3,7,8(1H,4H)-tetrone was chosen as the monomer to be electropolymerized onto carbon cloth (PDHPQ-Tetrone/CC). When used as the cathode material for aqueous ZIBs, an exceptional cycling life (>20,000 cycles) at a current density of 10 A g-1 was achieved, with the specific capacity maintained at 82.8% and with the Coulombic efficiency at around 100% throughout cycling. At the charge-discharge current density of 0.1 A g-1, the ZIB with PDHPQ-Tetrone/CC achieved a high specific capacity of 248 mAh g-1. Kinetic analyses showed that both surface-capacitive-controlled processes and semi-infinite diffusion-controlled processes contribute to the stored charge. The charge storage mechanism was investigated with ex situ characterizations and involves the redox processes of carbonyl/hydroxyl and amino/imino groups coupled with insertion and extraction of both Zn2+ and H+.

Introduction of element Bi in the P-block promotes N2 activation for efficient electrocatalytic nitrogen reduction to produce ammonia

The synthesis of ammonia through electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions is a presumable strategy. However, it still faces the problems of poor activity and low Faradic efficiency, so the development of efficient, stable and highly selective catalysts is of the importance. Molybdenum disulfide (MoS2) materials are widely used in NRR reactions owing to good electrical conductivity and abundant active sites, but the edge active site is the dual active site of NRR and competitive hydrogen evolution reaction (HER). Encouragingly, the strong interaction between elements in the P-block and N 2p orbitals results in excellent performance in adsorbing and activating nitrogen. Meanwhile, the partial occupation of p-orbitals by elements in the P-block also leads to poor HER activity. Herein, we introduced the P-block element Bi into 1 T-MoS2 and prepared Bi2S3/MoS2 composite. Taking advantage of the high conductivity of 1 T-MoS2 and the N2 adsorption and activation advantages of Bi element, an ammonia yield rate of 54.64 µg h−1 mg−1cat. and a high Faradic efficiency of 58.56 % were obtained. In addition, the active site and the evolution pathway of N2 reduction were investigated by in-situ infrared spectroscopy measurements and density functional theory (DFT). The in-situ infrared spectroscopy measurement results manifested the presence of the main intermediate transition state during the reduction of N2 to NH3. The calculation results indicated that N2 had the best adsorption on the introduced P-block element Bi, and the entire NRR reaction process followed an alternating pathway. This study reveals the synergistic effect of P-block elements and transition metal-based electrocatalytic materials on nitrogen reduction to ammonia synthesis.

Bicontinuous RuO2 nanoreactors for acidic water oxidation

Improving activity and stability of Ruthenium (Ru)-based catalysts in acidic environments is eager to replace more expensive Iridium (Ir)-based materials as practical anode catalyst for proton-exchange membrane water electrolyzers (PEMWEs). Here, a bicontinuous nanoreactor composed of multiscale defective RuO2 nanomonomers (MD-RuO2-BN) is conceived and confirmed by three-dimensional tomograph reconstruction technology. The unique bicontinuous nanoreactor structure provides abundant active sites and rapid mass transfer capability through a cavity confinement effect. Besides, existing vacancies and grain boundaries endow MD-RuO2-BN with generous low-coordination Ru atoms and weakened Ru-O interaction, inhibiting the oxidation of lattice oxygen and dissolution of high-valence Ru. Consequently, in acidic media, the electron- and micro-structure synchronously optimized MD-RuO2-BN achieves hyper water oxidation activity (196 mV @ 10 mA cm−2) and an ultralow degradation rate of 1.2 mV h−1. A homemade PEMWE using MD-RuO2-BN as anode also conveys high water splitting performance (1.64 V @ 1 A cm−2). Theoretical calculations and in-situ Raman spectra further unveil the electronic structure of MD-RuO2-BN and the mechanism of water oxidation processes, rationalizing the enhanced performance by the synergistic effect of multiscale defects and protected active Ru sites.

Construction of amorphous-RuOx / crystalline-WO3 heterostructures for high-performance triethylamine sensor

The introduction of amorphous phase to form the amorphous/crystalline (A/C) interface for exposing more active sites and enhancing device performance has proven to be an effective means. In this work, amorphous RuOx clusters were synthesized by a thermal annealing method. And then amorphous-RuOx/crystalline-WO3 composite heterostructures were prepared by self-assembling to fabricate gas sensor. This A/C heterostructure-based sensor exhibits a unique hybridized phase structure with abundant phase boundaries by combining crystalline and amorphous properties, which also shows abundant unsaturated active sites and enhanced catalytic performance. The sensor based on amorphous-RuOx clusters/crystalline-WO3 nanosheets showed a good response(∼36) to 10 ppm triethylamine at 140 °C as well as a fast response time (1 s), and lower limit of detection (0.5 ppm). This work provided a high-activity and good-stability A/C gas sensors, which proved the promising future of amorphous materials in gas sensors.

Polyaniline/reduced graphene oxide doping induced abundant active sites in enset fiber as an efficient adsorbent material for wastewater treatment

Polyaniline/reduced graphene oxide doping induced abundant active sites in enset fiber as an efficient adsorbent material for wastewater treatment

Spherical g-C3N4@PDA nanocarrier for synergistic chemo-photothermal tumor therapy

In this paper, by wrapping the near-infrared (NIR) response polydopamine (PDA) as a nanocoating on the surface of spherical nano graphitic phase carbon nitride (g-C3N4), a multifunctional g-C3N4/PDA (CNP) nanocarrier platform was prepared. The π-conjugation system in PDA and the electronegative hydroxyl groups on the surface of CNP promote the creation of abundant active sites, which had a high drug loading rate of about 98.5 % for the electropositive GA. Due to the strong NIR reaction of CNP, the release of GA from CNP/GA can be greatly accelerated by the rising temperature, bonding disruption and charge transfer. Moreover, the photo-generated electron-hole pairs could be excited by the NIR effect of CNP, which promotes the production of ROS (·OH, ·O2– and 1O2) to induce apoptosis in HepG2 cells. Thus, the present spherical CNP nanocarrier with a combination of enzyme-mimic activity and NIR-responsive properties has a great potential for chemo-photothermal synergistic tumor therapy.

Mg–Fe Layered Double Hydroxides/Polyacrylonitrile Nanofibers for Solar-Light Induced Peroxymonosulfate Elimination of Tetracycline Hydrochloride

The photo-induced peroxymonosulfate (photo-PMS) reaction is a promising route to eliminate antibiotics from waste water. To achieve excellent photo-PMS activity in Mg–Fe layered double hydroxides (LDHs) for tetracycline hydrochloride (TCH) degradation under simulative solar-light irradiation, Mg–Fe LDHs-loaded polyacrylonitrile (Mg–Fe/PAN) nanofibers were in-situ prepared via the hydrothermal route. For comparison to the photocatalysis and photo-PMS process, the Mg–Fe/PAN-assisted photo-PMS process exhibited a better elimination activity for TCH elimination. In addition, the photo-PMS activities of Mg–Fe/PAN composites were greatly affected by Mg–Fe LDHs content, TCH concentration, pH, and inorganic salts. Among these Mg–Fe/PAN composites, the optimal MgFe2/PAN with a Mg/Fe molar ratio of 1:2 and a nominal Mg–Fe LDHs content of 2.0 wt. % removed 81.31% TCH solution of 80 mg L−1 TCH within 120 min. This enhanced photo-PMS capacity of MgFe2/PAN was ascribed to the abundant active sites formed by functional groups and oxygen defects for efficient TCH species adsorption and photon capturing, and the tight interface between Mg–Fe LDHs nanoparticles and PAN nanofibers for the rapid separation and transfer of photoinduced e−/h+ pairs. SO4•− and •O2− radicals were vital for the MgFe2/PAN-assisted photo-PMS reaction.

Microwave-Solvothermal Synthesis of Mesoporous CeO2/CNCs Nanocomposite for Enhanced Room Temperature NO2 Detection

Nitrogen dioxide (NO2) gas sensors are pivotal in upholding environmental integrity and human health, necessitating heightened sensitivity and exceptional selectivity. Despite the prevalent use of metal oxide semiconductors (MOSs) for NO2 detection, extant solutions exhibit shortcomings in meeting practical application criteria, specifically in response, selectivity, and operational temperatures. Here, we successfully employed a facile microwave-solvothermal method to synthesize a mesoporous CeO2/CNCs nanocomposite. This methodology entails the rapid and comprehensive dispersion of CeO2 nanoparticles onto helical carbon nanocoils (CNCs), resulting in augmented electronic conductivity and an abundance of active sites within the composite. Consequently, the gas-sensing sensitivity of the nanocomposite at room temperature experienced a notable enhancement. Moreover, the presence of cerium oxide and the conversion of Ce3+ and Ce4+ ions facilitated the generation of oxygen vacancies in the composites, thereby further amplifying the sensing performance. Experimental outcomes demonstrate that the nanocomposite exhibited an approximate 9-fold increase in response to 50 ppm NO2 in comparison to pure CNCs at room temperature. Additionally, the CeO2/CNCs sensor displayed remarkable selectivity towards NO2 when exposed to gases such as NH3, CO, SO2, CO2, and C2H5OH. This straightforward microwave-solvothermal method presents an appealing strategy for the research and development of intelligent sensors based on CNCs nanomaterials.

Using Silica Aerogel Layers for the Stabilization of Zn Metal Anodes in Zn‐Ion Batteries

AbstractAqueous zinc ion batteries have the advantages of low cost, high safety, high theoretical specific capacity. However, the charging and discharging process is usually accompanied by side reactions such as dendrite growth, hydrogenolysis, corrosion of electrodes, passivation, etc., which limits the development and application. In this work, the zinc anode is modified by constructing a silica aerogel layer with ultra‐high specific surface area and abundant polar functional groups (−OH, −COOH, −CH3), which not only provides abundant active sites for the uniform deposition of zinc ions, but also construct an artificial protective layer that acting as a desolvation layer and a zinc ion flux regulator. Consequently, the altered zinc anode exhibits an extremely durable zincophilic characteristic and a declining interfacial impedance. The constructed artificial layer can prevent side reactions and promote uniform zinc ion deposition to prevent the generation of zinc dendrites during the charge/discharge process. Results show that the symmetric cells composed of modified Zn anodes can be stably cycled for more than 1100 h at 0.5 mA cm−2 and 0.5 mAh cm−2, which is much higher than that of bare Zn. In addition, the life and capacity retention of the Zn/MnO2 full cells were also significantly improved.

A rigid free-standing supercapacitor electrode material made from fat coal-based activated carbon foam

A free-standing electrode material is a competitive candidate for supercapacitor due to its excellent capacity and volumetric energy density. Currently, most of the studies are focused on the preparations and performances of flexible free-standing electrode materials, whereas few on the development of rigid free-standing electrode materials. Herein, a vitrinite concentrate of fat coal is used as a raw material and carbon black as an addition agent to prepare a carbon foam by way of high-pressure pyrolysis. The prepared carbon foam is activated by KOH solution to further achieve an activated carbon foam by which we have fabricated a rigid free-standing electrode material. The assembled symmetric device with the rigid free-standing electrode material demonstrates an extremely high areal specific capacitance of 2304.41 mF cm−2 at 4 mA cm−2, an outstanding cycling stability of 100 % after 40 000 cycles, and an excellent volume energy density of 10.23 mWh cm−3 at 31.78 mW cm−3. These fascinating electrochemical performances of the electrode material are attributed to unique 3D interconnected porous structure of the activated carbon foam. The micron-sized 3D interconnected pores facilitate the transport of electrolyte ions within the electrodes. Meanwhile, micropores on the 3D interconnected pore wall provide abundant active sites for electrolyte ions.

Nano‐LaMnO3 Modified Separator for Enhanced Redox Reaction Kinetics and Electrochemical Performance of Lithium‐Sulfur Batteries

AbstractThe “shuttle effect” and sluggish conversion reaction kinetics of polysulfides seriously hinder the practical application of Li−S batteries. In this study, nano‐sized LaMnO3 (N‐LMO) with typical perovskite structure combined with highly‐conductive carbon black (SP) was introduced on the commercial separator to fabricate a functional surface modification. It is found that the polar N‐LMO with abundant active sites offers strong chemisorption towards the soluble polysulfides meanwhile accelerates their redox conversion, and the conductive SP contributes to extra spots to reactivate the trapped sulfur species. Consequently, the synergistic effect of adsorption‐catalysis‐conduction built by the cooperative N‐LMO/SP modification greatly enhances the sulfur redox kinetics as well as suppresses the polysulfide shuttling not at the expense of weakening Li‐ion transport, which endows the Li−S cell with a high initial discharge capacity of 1143.6 mAh g−1 at 0.2 C and a capacity decay rate of only 0.072 % per cycle at 1 C over 500 cycles.

Three Birds with One Sulfur: Construction of Sulfur-Bridged Porous Organic Polymers for Efficient Gold Adsorption.

Sulfur is a massive byproduct of the petrochemicals industry and hardly employed as a building block for porous organic polymers (POPs). Here, a new family of sulfur-bridged POPs has been prepared via a C-H insertion reaction between sulfur and polycyclic aromatic hydrocarbons. Sulfur works as a solvent, external cross-linker, and porogen simultaneously during the polymerization process. The products demonstrate high porosity and maximum surface area of 1050 m2 g-1 with abundant accessible active sites, contributing to the nanometerization of sulfur and significantly enhancing the inherent affinity between heteroatoms toward soft metal ions. Therefore, they exhibit a high absorption capacity for Au(III) of 3287 mg g-1 and excellent absorption selectivity and removal efficiency via a performance evaluation even in real electronic wastewater. This synthetic strategy to prepare high added-value functional POPs with sulfur not only sheds light on designing high-performance gold adsorption materials and emerging POPs, but also promotes a sustainable development protocol.

Ultrasensitive Ti3C2Tx@Pt-Based Immunochromatography with Catalytic Amplification and a Dual Signal for the Detection of Chloramphenicol in Animal-Derived Foods.

Herein, a catalytic amplification enhanced dual-signal immunochromatographic assay (ICA) based on Pt nanoparticles (Pt NPs) modified with Ti3C2Tx MXene (Ti3C2Tx@Pt) was first developed for chloramphenicol (CAP) in animal-derived foods. Due to the large specific surface area and abundant active sites of Ti3C2Tx@Pt, they can be loaded with hundreds of Pt NPs to enhance their catalytic activity, resulting in a significant increase in the detection sensitivity; the sensitivity was up to 50-fold more sensitive than the reported ICA for CAP. The LODs of the developed method for milk/chicken/fish were 0.01 μg/kg, the LOQs were 0.03 μg/kg and the recovery rates were 80.5-117.0%, 87.2-118.1% and 92.7-117.9%, with corresponding variations ranging from 3.1 to 9.6%, 6.0 to 12.7% and 6.0 to 13.6%, respectively. The linear range was 0.0125-1.0 μg/kg. The results of the LC-MS/MS confirmation test on 30 real samples had a good correlation with that of our established method (R2 > 0.98), indicating the practical reliability of the established method. The above results indicated that an ICA based on the Ti3C2Tx@Pt nanozyme has excellent potential as a food safety detection tool.

Novel ultra-low NOx coal combustion technologies based on local microenvironment targeted regulation. Part 1. Selective oxygenation

Developing a novel high-efficiency coal combustion technology with ultra-low NOx emission is urgently needed to sustain the good ecological environment. Here, the targeted regulation of local microenvironment around fuel-N, such as functional groups, radicals, molecular configurations, and reaction atmosphere, is realized by the selective oxidation. The molecular configurations, including pore networks and microcrystalline structure in coal, are well characterized through synchrotron radiation-induced SAXS (small angle X-ray scattering) and WAXS (wide angle X-ray scattering) simultaneously. Furthermore, by combining density functional theory (DFT) and experiments, the effects of the local microenvironment on the nitrogen transformation and NO evolution during the thermal conversion are focused on. The results indicate that for the PPA oxidation, the H radicals attack the adjacent carbon to pyrrole/pyridine nitrogen, promoting the conversion of fuel-N to HCN. On the other hand, for the H2O2 oxidation, disrupting the π bond electron cloud by the CO and C = O on the ortho carbon of pyrrole/pyridine dominates the NH3 generation. Additionally, the increased La (average graphene layer extent), a3 (average interlayer spacing), σ3 (standard deviation of interlayer spacing) and σ1 (standard deviation of the first-neighbor distribution) induce massive smaller pores, promoting the generation of abundant reaction defects inside the particles. Importantly, the intensified adsorption on abundant active sites lead to the decreased HCN and increased NH3 evolution, which is adverse for the interaction between homogeneous and heterogeneous NO reduction. Interestingly, the PAA selective oxidation can reduce NO emission by 31.72 % - 34.30 % during the air combustion, which is far better than the H2O2 oxidation. Overall, the attack of free radicals on nitrogen-containing heterocycles promotes the conversion of fuel-N to HCN, the adsorption of which on char surfaces can further enhance the heterogeneous reduction in a lean oxygen atmosphere. The work here provides a novel route for developing high-efficiency and low-NOx combustion technologies.

Discovering the Order-Disorder Transition in Quinoline Intercalated Vanadium Oxide with Superior Calcium Storage via Polyhedral Distortion.

Calcium-ion batteries (CIBs) are considered as potential next-generation energy storage systems due to their abundant reserves and relatively low cost. However, irreversible structural changes and weak conductivity still hinder in current CIBs cathode materials. Herein, an organic molecular intercalation strategy is proposed, in which V2O5 regulated with quinoline, pyridine, and water molecules are studied as cathode material to provide fast ion diffusion channels, large storage host, and high conductivity for Ca ions. Among them, V2O5-quinoline (QVO) owns the largest interplanar spacing of 1.25 nm and the V-O chains are connected with organic molecular by hydrogen bond, which stabilizes the crystal structure. As a result, QVO exhibits a specific capacity of 168 mAh g-1 at 1 A g-1 and capacity retention of 80% after 500 cycles at 5 A g-1 than the other materials. Furthermore, X-Ray diffraction and X-ray absorption spectroscopy results reveal a reversible order-disorder transformation mechanism of Ca2+ for QVO, which can make full use of the abundant active sites for high capacity and simultaneously achieve fast reaction kinetics for excellent rate performance. These results demonstrate that QVO is a promising cathode material for CIBs, providing more choices for the development of high-performance CIBs.

Enhanced charge separation of Cu-BTC@CuSe@TiO2 hollow octahedrons for efficient CO2 photoreduction with superior CO selectivity

Solar-driven photocatalytic conversion of CO2 into high-value-added fuels has attracted widespread attention. However, the relatively low conversion efficiency and product yield severely limited photocatalytic applications. In this work, binary Cu-BTC@TiO2 catalysts with adjustable inner cavity were prepared using copper-based metal organic framework (Cu-BTC) octahedrons as substrate via a solvothermal reaction. In this process, the inner Cu-BTC octahedrons can be controllably etched into a hollow octahedral structure in the presence of HF. Subsequently, the Cu-BTC@CuSe@TiO2 hollow octahedrons (HOs) were fabricated by selenization reaction and exhibited various properties such as abundant active sites for CO2 adsorption and reduction reactions, shortened charge transfer distance to prevent electron-hole recombination, and internal reflection/scattering effects to improve solar light utilization. Moreover, the formed dual p-n heterostructures between p-type CuSe and n-type semiconductors (Cu-BTC and TiO2) effectively promote spatial separation and migration of charge carriers. The synergistic effect of these advantages makes the optimized Cu-BTC@CuSe@TiO2 HO catalyst exhibit remarkable CO2 photoreduction performance with a CO production rate of 72.3 μmol h−1 g−1 and near 100 % selectivity. This work opens a new pathway for designing highly active photocatalysts with excellent product selectivity.

Novel amorphous FeOOH-modified Co9S8 nanosheets with enhanced catalytic activity in oxygen evolution reaction

Efficient oxygen evolution reaction (OER) is vital for water electrolysis and advanced hydrogen energy production. However, the sluggish kinetics of this reaction require significant overpotentials, leading to high energy consumption. Therefore, developing OER electrocatalysts with exceptional performance and long-term durability is crucial for enhancing the energy efficiency and cost-effectiveness of the hydrogen production process. In this research, novel FeOOH/Co9S8 catalysts were prepared through a two-step hydrothermal reaction followed by one-step electrodeposition on nickel foam for an alkaline OER. The as-obtained catalysts possessed abundant non-homogeneous interfaces between FeOOH and Co9S8 nanosheets, conducive to optimized coordination environments of Fe and Co sites by redistributing interfacial charges. This synergy strengthened the chemisorption of oxygenated intermediates, leading to accelerated reaction kinetics, abundant active sites, and enhanced OER performance. The optimized electrocatalyst FeOOH/Co9S8-15 achieved a current density of 10 mA cm−2 at an overpotential of 248 mV and good stability for over 140 h. This study presents a novel approach for producing compelling and durable alkaline dielectric OER electrocatalysts, which will be helpful in the future manufacturing of advanced energy devices.

Rational one-step synthesis of porous PtAg nanowires for methanol oxidation with a CO-poisoning tolerance: An experimental and theoretical study

Binary Pt-based porous nanowires (PNWs) are highly promising for electrochemical applications owing to their high surface areas, abundant active sites, and immense durability against aggregation, but their simple template-free synthesis for methanol oxidation reaction (MOR) is rarely reported. Herein, we provide a simple and template-free method for the one-step fabrication of PtAgx PNWs via autocatalytic and oriented attachment growth mechanism in an autoclave. This drives the formation of ultra-long PtAg PNWs (∼1.5 µm length and 20 nm width) with agglutinated pores (2–10 nm), high Ag content (22–34 wt%), and upshifted d-band center. These merits endowed the methanol oxidation reaction (MOR) mass activity of PtAg PNWs (2.22 mA/µgPt) by 2.4 and 3.4 times than those of Pt PNWs and commercial Pt/C catalyst, respectively, based on equivalent Pt mass besides a superior stability and CO-poisoning tolerance. The MOR activity of PtAg PNWs outperformed previously reported PtAg nanostructures. Density functional theory (DFT) simulations confirmed the bifunctional MOR mechanism with a lower energy barrier for dissociative adsorption of methanol molecules (0.49 eV) and CO oxidation on PtAg PNWs than Pt PNWs. This study may allow the formation of Pt-based PNWs alloys with various metals for MOR.

From bulky Si to porous medium entropy alloy: Enabling highly efficient Li storage via the simultaneous reconstruction of microstructure and component

We show here that the Li-storage performance of Si anode can be substantially improved by engineering a multilevel nanoporous SiGeTiZnCuAl medium entropy alloy (NP-MEA). The NP-MEA is directly engineered through a corrosion-driven phase and structure simultaneous reconstruction by partially etching Al and Zn from the multi-element master alloy. The unique multi-elemental interactions can revolutionize the chemical microenvironment, and thus stabilize the structure and impel the transportation of the electrons and ions. The metallic sponge offers multilevel pore channels for electrolyte permeation and ample space for volume change accommodation, abundant accessible active sites for lithiation/delithiation, as well as the rigid skeleton for expediting the electron transportation and stabilizing the structure. Benefiting from the synergy of component and structure, the NP-MEA delivers a high reversible capacity of 646.1 mAh g−1 after 500 cycles at a current density of 2Ag−1.

In situ electrodeposited Zn-doped CoNiS as an efficient and stable electrocatalyst for overall water splitting in neutral media

Zinc-doped cobalt nickel sulfides coupled with polypyrrole hollow nanospheres grown on carbon paper (Zn-CoNiS/PHS/CP) were developed by unipolar pulse electrodeposition (UPED) method as efficient and stable electrocatalysts for hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting in neutral media for the first time. With abundant active sites intrigued by moderate Zn doping, the optimized Zn10-CoNiS delivers improved catalytic performance with small overpotentials of 213mV and 414mV to achieve the current densities of 10mAcm−2 for HER and OER respectively, and outstanding long-term stability. The water electrolyzer device with Zn10-CoNiS as both anode and cathode delivers a current density of 10mAcm−2 at a cell voltage of 1.896V in neutral media. The low charge transfer resistance of Zn-CoNiS and confinement effect of 2D Ni9S8/Co9S8 nanosheets on 0D ZnS nanodots endow the bifunctional electrocatalysts with efficient activity and high stability, providing a competitive candidate for green hydrogen production.